Facilities / Weil Hall Structures Laboratory / Fabrication

 [ home ]   [ Fabrication ]   [ Hydraulics ]   [ Materials Handling & Prep ]   [ Materials Testing ]  

Drill Presses

The lab has several drill presses from a Delta 10" 1/4 HP Bench top drill press to a Cincinnati Bickford 5HP 21" drill press. There are also a Delta 16.5" 3/4 HP drill press and a Powermatic 1 HP 15" drill press.  

Metal and Wood Saws

The lab is equipped with several different saws to accommodate many mediums. For metal cutting, there is a Delta 10" 13 amp miter saw that can be fitted with a metal cutting disc, or for larger cuts the 1 HP Enco metal cutting band saw can be used.

There is a small Delta bench top band saw with a 1/3 HP motor to cut small wood, metal or composite pieces. For larger wood pieces, the miter saw is normally outfitted with a wood cutting blade. Then, there is a Hitachi C10FR 10" Table saw with a 3HP motor, a SkilSaw 12 amp 7 1/4" circular saw mounted to a SawTRAX panel saw frame and a DoAll Model 2013-V 2HP band saw.  

Grinders and Sanders

In addition to the Concrete Cylinder Grinder, there are two belt sanders (a Wilton belt sander and a 1 HP Dayton belt sander. There are also two grinders; one is a Delta and the other is a JET.  


University of Florida College of Engineering
Kirk Hatfield, Director
Engineering School of Sustainable
Infrastructure & Environment
365 Weil Hall
1949 Stadium Road
P.O. Box 116580 | Gainesville, FL 32611
Telephone: (352) 392-9537, ext. 1400
Fax: (352) 392-3394
University of Florida



Copyright © 2014 by ESSIE. All Rights Reserved.

Site created by BigMediaStudios.com®

Valid XHTML 1.0 Transitional